Breadcrumb

Revised Application technology holding furnace in the Non ferrous metals sector

Holding furnace

Lowering emissions, increasing production, saving fuel with tailormade oxygen applications

GAS APPLICATION

Particularly efficient cleaning takes place by introduction of an inert gas into the melt. In the case of holding ovens, bottom purging is preferably used. This is a feeding system made of a porous material, which is arranged in the bottom of the melting vessel, and from which the gas ascends in the melt in the form of fine bubbles. Accompanying substances are entrained by the ascending gas bubbles and accumulate as slag on the surface of the melt. An additional positive effect is a homogenisation of the molten bath through the constant motion resulting from the ascending gas bubbles.    

 

To ensure that the temperature of the melt remains constant, burner systems are also installed in the holding furnaces. Combustion with oxygen (oxyfuel), possibly in combination with flue gas recirculation or combustion with oxygen-enriched air, reduces the fuel consumption and increases the economic efficiency of the process.   

Advantages of Oxyfuel burner systems at a glance:

Higher combustion efficiency
Higher melting rate
Faster heating-up times
Lower fuel consumption
Higher processing temperatures possible
Faster reaction speeds
Lower exhaust gas levels
Less dust
Lower emissions
Lower production costs
MESSER SOLUTION
In addition to the gases required for your process, Messer offers a variety of equipment for its optimisation under the brand names Oxipyr and Oxijet. In order to select the optimum system, experts from Messer first carry out a comprehensive process analysis. Following calculations and basic engineering, suggestions are made for optimisation and further procedures. 

Revised Customer process holding furnace in the Non ferrous metals sector

Holding furnace

Homogenization, alloying of aluminium melt