Breadcrumb

Revised Application technology preheating of transport crucibles in the Non ferrous metals sector

Preheating of transport crucibles

Lowering emissions, saving time and fuel with tailormade oxygen applications

GAS APPLICATION

By using oxygen (oxy-fuel) instead of air as an oxidising agent, considerably higher temperatures can be achieved in a shorter time. Furthermore, fuel consumption is reduced and process efficiency increases.   

 

Advantages of Oxyfuel burner systems at a glance:

Higher combustion efficiency
Higher melting rate
Faster heating-up times
Lower fuel consumption
Higher processing temperatures possible
Faster reaction speeds
Lower exhaust gas levels
Less dust
Lower emissions
Lower production costs

MESSER SOLUTION
In addition to the gases required for your process, Messer offers a variety of equipment for its optimisation under the brand names Oxipyr and Oxijet. 

In order to select the optimum system, experts from Messer first carry out a comprehensive process analysis. Following calculations and basic engineering, suggestions are made for optimisation and further procedures.

Oxipyr – Burner Technology

The characteristics of the burner types are multi-faceted and range from low to high momentum burners, oxy-fuel to oxygen/air mixing burners and burners for different fuels or fuel combinations. The systems are controlled manually, semi- or fully automatically following compositions or temperature.   

Revised Customer process preheating of transport crucibles in the Non ferrous metals sector

Preheating of transport crucibles

Heat-up for transporting molten aluminium